Utah Tire Carousel: Vidir Vertical Tire Storage for Wasatch Front Dealerships & Fleets

Material Handling USA is headquartered in Salt Lake City and stocks, sizes, and installs Vidir Tire Carousels for dealerships, tire shops, and fleet garages across the Wasatch Front — recovering up to 70% of the floor space a static tire rack requires.

Talk with a specialist: Sales@MH-USA.com

Vidir Tire Carousel installed in a Utah dealership service bay

70%

Floor space recovered

352

Tires per standard unit

1–3 days

Typical Utah install time

SLC HQ

Local sizing & service

Local Tire Storage Expertise on the Wasatch Front

Material Handling USA is based in Salt Lake City, so a Utah dealership or service center working with us isn’t dealing with an out-of-state reseller reading specs off a data sheet. We size Vidir Tire Carousels to your actual ceiling height, tire mix, and floor plan, coordinate delivery, and can be on-site for service calls along the I-15 corridor from Ogden to Provo. For the full national lineup and specifications, see our Vidir tire carousels page.

Multiple Vidir Tire Carousel units installed in a warehouse aisle

Why Wasatch Front Shops Are Moving Off Floor Racks

Tire storage space is at a premium in Salt Lake City, Ogden, Provo, and every growing service center squeezed onto a tight lot. Dealerships and independent shops that once stacked tires on the ground or on open static racks are switching to the Vidir Tire Carousel to reclaim that floor space for service bays and additional inventory — without adding onto the building.

The carousel rotates tire carriers vertically and brings the requested set down to the operator at waist height, removing the ladder climbs and manual lifting that come with floor-to-ceiling static racking.

Where Utah Businesses Use the Vidir Tire Carousel

A carousel is sized differently for a dealership service bay than a fleet garage. Here’s how Utah operations typically put it to work:

Vidir Tire Carousel installed in a Utah tire service centerNew & Used Car DealershipsSeasonal tire and wheel sets stored vertically, freeing service bay floor space without a lot expansion.
Vidir Tire Carousel storing large truck tiresIndependent Tire & Service CentersHigher-volume tire inventory organized by carrier position, cutting the time technicians spend searching a back room.
Vidir Tire Carousel installed near a mezzanine storage areaMunicipal & Fleet GaragesFleet and municipal vehicle tire inventory kept secure with keypad access and optional enclosed security gates.
Technician retrieving a tire from a Vidir Tire CarouselDistribution & Warehouse FacilitiesHigh tire counts stored in a compact footprint where warehouse floor space is committed to other operations.

Choosing a Tire Carousel Size for Your Utah Shop

Vidir builds the tire carousel in three carrier families, sized by the largest tire you store, across 22 standard models. In a Wasatch Front dealership or fleet garage the choice usually comes down to three numbers we measure on site: clear height under the lowest obstruction (sprinklers, lights, door headers), the largest tire diameter in your mix, and how many tires you need in one bay.

Family Largest tire Standard heights Tires per unit
T39 28″ 13′ 2″ to 26′ 6″ 147 to 352
T45 33″ 14′ 3″ to 21′ 7″ 119 to 189
HT54 heavy tire 44″ 15′ 2″ to 28′ 1″ 65 to 130

The complete model table, with every footprint, carrier count and tires per square foot, plus the technical specs and options, is on our national Vidir tire carousels page. Once we have measured your Utah building, we narrow it to the one or two models that fit.

Every Carousel Is Built to Order

Custom heights, footprints, RAL color finishes, and single- or multi-unit banks are available — call (801) 328-8788 to confirm the model that matches your exact tire mix and ceiling clearance.

Vidir Tire Carousel with horizontal security gate option

Security, Durability, and Utah Seismic Considerations

Every Tire Carousel ships standard with forward/reverse push-button controls, a security keypad, and an emergency stop, with mesh guarding front and back. Optional add-ons include a horizontal security gate or a full enclosure for shops that need to restrict access to stored inventory entirely.

Units are built on a rated chain-drive system (13,000 lb. overall chain rating) and carry the cCSAus safety mark with a 2-year manufacturer’s warranty. For Utah installations, our team can provide engineering documentation to support local seismic and building-code review where required.

Vidir Tire Carousel vs. Traditional Static Tire Racking

Material Handling USA sells both. Here’s an honest look at where each one fits for a Utah shop.

Vidir Tire Carousel Static Tire Rack
Floor space for ~150 tires Roughly the footprint of one carousel column Multiple rows of open steel shelving
Retrieval Tire delivered to the operator at push-button height Operator climbs, bends, or reaches into open bays
Access control Keypad and optional enclosed security gate Open access unless the whole room is secured
Footprint growth Adds vertically without a larger building footprint Adding capacity means adding floor-level rack rows
Best fit High tire counts, tight floor space, security concerns Lower tire counts, ample floor space, lower budget

Where static racking is the better fit for part of the room, our Utah tire storage rack hub covers tire racking for Wasatch Front shops, dealerships and fleets, and the national commercial tire storage racking guide compares rack formats.

How a Utah Tire Carousel Installation Works

1

Site Assessment

We review your ceiling height, floor plan, tire mix, and current storage setup — in person for most Wasatch Front locations or via photos/video for outlying areas.

2

Model Selection & Quote

We size the T39, T45, or HT54 platform (or a multi-unit bank) to your actual tire diameters and volume, and provide a detailed quote with lead time.

3

Delivery & Installation

Most Utah installations are completed in one to three days once the unit arrives, with our team coordinating directly with your facility to minimize downtime.

4

Training & Support

We walk your team through operation and controls at handoff, and our Salt Lake City-based service team is available for follow-up maintenance and parts.

Why Utah Businesses Work With MH-USA

Because we’re based in Salt Lake City, a Utah dealership or shop isn’t waiting on freight from an out-of-state distributor for a site visit, a service call, or a replacement part. We coordinate delivery and installation directly, and our team can provide engineering documentation to support local building-department review where a facility requires it. That local presence is also why we can typically turn around a Utah quote faster than a national reseller working the account remotely.

Frequently Asked Questions

Does Material Handling USA install Vidir Tire Carousels in Utah?
Yes. MH-USA is headquartered in Salt Lake City and installs Vidir Tire Carousels for dealerships, tire shops, and fleet garages along the Wasatch Front, including Ogden, Salt Lake City, Sandy, and Provo. Call (801) 328-8788 to schedule a site assessment.
How many tires can a Vidir Tire Carousel hold?
Standard Vidir tire carousels hold from 65 tires (the smallest 44″ heavy-tire model) up to 352 tires (the widest 28″ model), across 22 standard models.
How much floor space does it actually save?
It depends on your current layout and ceiling height, but moving from floor-level racks to a vertical carousel typically recovers up to about 70% of the floor space used for the same tire count.
How long does installation take once a unit arrives?
Most vertical carousel installations are completed in one to three days once the unit is on-site, with our Salt Lake City-based team coordinating directly with your facility.
Can Material Handling USA size the right model for my shop?
Yes — call (801) 328-8788 or request a quote and we’ll size a carousel (or a bank of carousels) to your tire diameters, quantities, ceiling height, and floor plan.

Ready to Reclaim Your Floor Space?

Talk to our Salt Lake City-based team about sizing a Vidir Tire Carousel for your Utah facility.

Headquartered in Salt Lake City, UT • Serving customers nationwide
Local service areas: Salt Lake City • Provo • Ogden • Park City • St. George • Logan • Lehi • Orem