Material Handling Solutions for Robotic Manufacturers

Storage Built Around a Robot Cell, Not Around It

Robotic manufacturers run two very different storage problems on the same floor. On one side is the parts side — motors, gearboxes, harmonic drives, ball screws, sensors, wiring harnesses, and controller boards that need to be organized, ESD-safe where it matters, and fast to kit. On the other is the machine side — finished robotic arms, end-of-arm tooling, fixtures, and test cells that need floor space, guarding, and secured access while they are staged, tested, or waiting to ship.

We design both halves together: pallet rack and shelving sized to your actual component sizes and pick frequency, cage systems around cells and high-value assemblies, and ESD-controlled workbenches for the sub-assembly line — laid out so the two sides of the floor don’t compete for the same aisle.

Storage by System

The eight systems most robotics manufacturers combine on one floor:

Cage Systems for Robot Cells & ToolingWire mesh cages around robotic arms, end-of-arm tooling cribs, and customer-consigned fixtures — see through for supervision, still locked and logged.

Machine Guarding for Robot Work CellsPerimeter guarding sized to your robot’s reach envelope and safety-rated stop zones, built to support ANSI/RIA R15.06 and OSHA 1910.212 requirements.

ESD Workstations for Controller & Sensor AssemblyGrounded ESD workbenches and static-safe bin storage for controller boards, drives, and sensor assemblies built to ANSI/ESD S20.20.

Kitting Carts for Build-Stage Sub-AssemblyMobile kitting carts staged with the exact fasteners, harnesses and sub-components each build station needs — no walking the floor mid-build.

Bin Shelving for Small ComponentsHigh-density bin shelving for motors, gearboxes, sensors, connectors, and fasteners — organized by SKU so pickers aren’t hunting through open totes.

Vertical Lift Modules for High-Value PartsGoods-to-person VLMs for expensive drives, encoders and control boards — tracked by part number, delivered to the operator instead of searched for.

Pallet Rack for Raw Material & Finished UnitsSelective pallet rack for incoming castings, extrusions and sub-frames, plus staging bays for finished robots and packaged systems awaiting shipment.

Mezzanines for a Second-Level Test or Storage DeckA mezzanine over the test floor for stock, tooling, or an observation deck — freeing ground-floor square footage for robot cells and staging.

Machine Guarding & Safety Standards

Robot cells carry a safety layer that a lot of general manufacturing storage doesn’t: a powered arm with a defined reach envelope and a safety-rated stop system. The storage and guarding around that cell has to respect both.

• ANSI/RIA R15.06 — the U.S. industrial robot safety standard covering guarding, safeguarding devices, and the minimum safe distance around a robot’s reach envelope.
• OSHA 29 CFR 1910.212 — general machine guarding requirements that apply to points of operation, including robotic work cells.
• ANSI/ESD S20.20 — the standard we build ESD workstations and static-safe storage to for controller, drive, and sensor sub-assembly.
• ISO 10218-1/-2 — the international robot safety standard many OEM customers reference alongside or instead of R15.06 for export or multinational programs.

MH-USA designs and supplies the physical guarding, cages and ESD-controlled furniture. We are not a registrar, safety consultant, or compliance authority — your safety engineer or integrator sets the risk assessment and guarding spec; we build to it.

Cleanroom & ESD Options for Precision Robotics

Some robotics builds don’t stop at ESD-safe — semiconductor handling arms, medical and surgical robotics, and optics-integration work often need a controlled particulate environment on top of static control. We build modular cleanroom walls, ceilings and filtration packages that wrap around an existing bay, so you can section off a Class 100,000 (ISO 8) or tighter assembly area without a full building addition.

A modular cleanroom pairs with the same ESD workbenches and bin shelving used on the open shop floor — the difference is the wall, ceiling and filtration package around it, not the furniture inside it. That means we can quote both in one layout: open ESD assembly for sub-components, and a sealed cleanroom cell for the steps that need it.

Typical additions: HEPA-filtered ceiling modules, pass-through windows for parts hand-off without opening the main door, and gowning anterooms sized to your shift count.

Related Reading & Systems

What Is Warehouse Automation: A 2026 GuideHow AMRs, ASRS and robotic picking fit into a modern warehouse — useful background if your robots ship into automated fulfillment operations.

Advanced Manufacturing Storage SolutionsOur broader hub for precision and advanced manufacturers — parts kitting, defense manufacturing, and machine shop storage that overlaps with robotics production.

Security Cages & Tool CribsThe full range of cage configurations — single-door cribs to multi-bay secured rooms — for tooling, fixtures, and consigned equipment.