Quantum Wire Shelving
Quantum Storage Systems wire shelving in chrome, stainless steel and gray, black or Proform green epoxy: starter kits, add-on units, slanted and basket units, dunnage racks, casters and sliding track kits, specified and shipped nationwide by MH-USA.

600–800 lb
Per shelf, by size
5
Finish families
54″–86″
Post heights
1″
Groove increments
Shop Quantum Wire Shelving Kits Online
Genuine Quantum starter and add-on kits in our online store. Need other sizes, finishes, a full room or freight to a job site? Request a quote and we price the whole run.
Quantum Chrome Wire Shelving Starter Kit, 48″W x 24″D x 74″H, 4 ShelvesFrom $307.81View product → · All Quantum products
Quantum Chrome Wire Shelving Add-On Kit, 48″W x 24″D x 74″H, 4 ShelvesFrom $280.10View product → · All Quantum productsQuantum Wire Shelving: What the Line Includes
Quantum Storage Systems is known for plastic bins and bin systems, and its wire shelving line is built to carry those bins. The line covers the parts most projects need: four-post starter kits, two-post add-on units, loose shelves and posts in every finish, corner and slanted shelving, post-mounted baskets, dunnage and platform racks, wall-mount cantilever systems, wire carts, casters and two high-density sliding track systems.
Quantum’s literature describes the shelves as all-welded with extra wire trussing, held on 16-gauge carbon-steel posts. The posts are grooved every inch and numbered, and split conical sleeves lock each shelf corner to its post with no tools. On most sizes the top mat wires run front to back, so cartons slide on and off easily.
This page covers the Quantum wire line specifically. To compare constructions and brands first, start with our industrial wire shelving guide. For Quantum bins, steel shelving and carts beyond wire, see our Quantum Storage Systems overview.

Quantum Starter Kits vs Add-On Units

The first decision on a Quantum order is how many units are starters and how many are add-ons. Getting the mix right saves posts, money and floor space.
- Starter kit (WR models): four posts and four or five shelves, freestanding. Example: WR74-2448C is a 24″ x 48″ x 74″ chrome starter with four shelves; WR74-2448C-5 is the five-shelf version.
- Add-on unit (AD models): two posts plus S-hooks that hang the shared shelf ends on the posts of the neighboring unit. Example: AD74-2448C.
Quantum’s starter-kit pages describe straight-line, right-angle and back-to-back layouts once an add-on is attached. A 20-foot wall run of 48-inch bays is one starter and four add-ons, not five starters.
When to buy all starters: island units that must move independently, units going on casters, and any bay that may later be moved to another room. An add-on cannot stand by itself.
Right-angle runs: a corner is an add-on hung off the starter’s corner posts, so the L shares posts instead of doubling them. Quantum also sells dedicated corner shelving in chrome and green epoxy for awkward corners.
Match finishes inside a run. An add-on should use the same finish as the starter it hangs from. Mixing chrome add-ons onto an epoxy starter in a humid room makes the chrome the weak point.
Send us the wall lengths and we will return the starter/add-on count with part numbers before you order.
Quantum Wire Shelving Finishes
Finish is the decision that matters most over the years. Here is how Quantum’s own product pages and chrome brochure describe each finish. Use this table to narrow the choice, then let us confirm the exact model.
| Quantum finish | Model suffix | Manufacturer’s stated environment | Typical rooms |
|---|---|---|---|
| Chrome | C | Dry environments only; chrome brochure marks wet, cooler and freezer storage as no | Stockrooms, offices, retail backrooms, dry parts rooms |
| Gray epoxy | GY | Suitable for wet and humid areas | Walk-in coolers, beverage rooms, humid storage |
| Proform green epoxy | P | Suitable for wet and humid environments | Food storage rooms, coolers, produce areas |
| Black epoxy | BK | Suitable for wet and humid areas | Front-of-house, retail and display where appearance matters |
| Stainless steel | S | Starter-kit page lists dry areas; confirm wet or corrosive use with us | Labs, pharmacy, clean dry storage needing stainless |
Chrome is the bright, economical finish. Quantum’s chrome brochure says the plating goes over a copper-nickel surface and is meant for dry storage. It lists a 1-year limited rust warranty that applies only in dry, non-humid environments. Inside a walk-in cooler, chrome is the wrong choice.
Gray epoxy is the usual answer for coolers and humid rooms. Quantum’s gray starter-kit pages list it as suitable for wet and humid areas and NSF-approved, with the same 800 lb load capacity listed for the chrome kits.
Fitting out a cold room? Our walk-in cooler shelving guide covers airflow, bottom-shelf height and dunnage.


Proform green epoxy is Quantum’s green coated finish, used in food-handling rooms where a visibly different shelf helps keep food storage separate from general storage. Quantum lists it as suitable for wet and humid environments. Green epoxy is also offered as combination wire-and-polymer-mat shelving and as corner shelving.
We make no health or sanitation-performance claims about coated finishes. Pick the finish by the room’s moisture and cleaning routine, and confirm any listing your inspector needs for the exact model.
Black epoxy carries the same wet-and-humid description as gray, in a darker look that suits customer-facing rooms, shops and display areas. Quantum offers black epoxy shelves, posts, starter kits, add-on units and black epoxy wine shelving.
Stainless steel is offered as wire shelves, solid shelves, posts, starters and add-ons. Quantum’s US stainless starter-kit page lists dry-area use. If you are buying stainless for washdown or chemical exposure, ask us to confirm with Quantum in writing first.

Quantum describes its green epoxy finish as an antimicrobial durable finish. Compare it with other manufacturers’ treated shelving in our antimicrobial shelving guide.
Quantum Wire Shelving Sizes and Load Ratings
Quantum lists more than 360 chrome starter-kit variants alone. They are built from a small set of dimensions, so it helps to think in three numbers: shelf depth, shelf width and post height.
| Dimension | Quantum chrome starter-kit range | How to choose |
|---|---|---|
| Shelf depth | 12″, 14″, 18″, 21″, 24″, 30″ (36″ kits also listed in our store) | Deepest carton or bin plus an inch; 18″ and 24″ cover most stockrooms |
| Shelf width | 24″ to 72″ (not every width in every depth) | Wall length divided into even bays; 48″ is the common bay |
| Post height | 54″, 63″, 74″, 86″ | Ceiling, sprinkler clearance and reach; taller posts add positions, not capacity |
| Shelf count | 4 shelves standard, 5 shelves with the -5 suffix | More levels for small items; add loose shelves later in the same finish |
| Load capacity | Quantum publishes 600–800 lb per shelf; reviewed starter kits list 800 lb | Evenly distributed static loads; mobile and slanted units are lower |
A few rules keep a Quantum order from going wrong:
- Read the model number. WR74-2448GY-5 means starter (WR), 74″ posts, 24″ deep by 48″ wide, gray epoxy (GY), five shelves (-5). AD replaces WR for an add-on.
- The shelf rating is not the unit rating. Spread heavy loads across several shelves and keep the heaviest items low.
- Bottom shelf height matters. The grooves are every inch, so in a cooler or a room cleaned by mopping, set the lowest shelf a few inches off the floor.
- Leveling legs come with the posts. Quantum notes they cannot be combined with stem casters, so order the mobile version from the start if a unit will roll.

Quantum Wire Shelving Bins and Accessories
Quantum’s accessory catalog is broad. These are the parts our customers order most:
- Dividers and wire carton dividers: Quantum’s DIV dividers are 8″ high and come in seven depths to fit every shelf; taller carton dividers split a shelf into lanes.
- Side and back ledges: stop cartons and bins from sliding off the back or ends.
- Shelf inlay mats and wire shelf covers: give a solid surface for small items.
- Label holders, bin rail holders, hang rails and hang bars: for labelling and hanging bins.
- S-hooks, split sleeves and collar plugs, post clamps, foot plates and floor guides, mounting brackets: the hardware that joins, levels and fixes units.
- Modular enclosure panels, push and U-handles, tie bars, modular dolly frames, drawer slides, keyboard shelves and document holders.


Quantum’s main strength is putting wire shelving and bins together. Its wire shelving with hang-and-stack or shelf bins comes ready to use for parts rooms, maintenance shops and kitting areas. Bins sit on the shelf or hang from rails, and the open wire keeps the contents visible.
For layouts that are mostly bins, our wire shelving with bins page compares bin sizes and unit configurations. Quantum’s reel shelving, wire louvered panels and post-mounted baskets cover cable reels, hanging bins and bulky soft goods.
Send us your part list or a photo of the room and we will suggest bin sizes per shelf depth.
Quantum Slanted, Basket and Mobile Wire Shelving
Slanted shelving tilts the shelves toward the picker so product rolls or slides forward. Quantum describes the sloped shelves as giving high visibility, productive rotation and gravity feed for supply distribution. The line includes stationary and mobile slanted shelving units, slanted bin units and a slanted work-station cart.
Example: the 1836SL6C chrome stationary slanted unit is 18″ x 36″ x 63″ with five shelves. Ask us for the confirmed load rating of the exact slanted model before you plan heavy loads.


Mobile slanted units loaded with clear dividable grid containers are popular in kitting, line-side supply and hospital supply rooms. The unit rolls to the point of use, and the tilted shelves keep every container visible.
Post basket units replace flat shelves with deep wire baskets that attach to the posts at all four corners. The WRC74-BSK1824C-5 mobile basket unit carries five baskets on 74″ chrome posts, 18″ x 24″ x 80″ overall, with an 800 lb listed load capacity.
Casters: Quantum sells stem casters, plate casters, complete mobile kits and caster accessories. Specialty sets include the WR-00CO ESD/conductive swivel stem casters: a set of four 5″ x 1-1/4″ casters, two with brakes. Quantum states they keep a unit grounded for static-sensitive electronics.
Electronics room? See our ESD shelving guide for grounding layout.
Wire carts and utility carts round out the mobile range for moving stock between rooms.

Quantum High-Density Sliding Track Wire Shelving
When a room has more stock than aisle space, Quantum’s High Density Sliding Track System puts wire units on skates over floor rails. Several units share one open aisle instead of each needing its own.
- Single-unit and double-unit floor track assembly kits: the QVTRK-2-108EST kit, for example, includes a pair of 108″ (9-foot) aluminum tracks and an end stop kit that stops the skate and anchors the track.
- Single-unit and double-unit skate assembly kits that fit under the wire units.
- Components for extending or customizing runs.
Quantum also lists a High Density Sliding Overhead Track system with its own components and kits.

For a comparison with other track and mobile systems, see our track shelving page. Send us the room length, depth and door locations and we will lay out the tracks, the number of moving units and the open aisle.
Quantum Dunnage and Platform Racks
Heavy cases, sacks and kegs belong on low dunnage, not on the bottom wire shelf. Quantum’s dunnage and platform range includes dunnage shelves, 3-sided frames, mobile dunnage platform racks, modular dunnage racks, tank and beverage container racks, shelf platform racks, polymer dunnage racks and an EZ Lock platform rack and pallet.
Example: the M18366DGY mobile dunnage platform is gray epoxy, 18″ x 36″, about 12″ high. It comes with four posts, a frame, a dunnage shelf, four donut bumpers and four 5″ stem casters that Quantum says will not mark floors.
Quantum’s 1836DS Blue Endurance dunnage shelf uses 1″ square tubular steel with removable wire decking. Quantum’s product page states a 1,300–1,600 lb load capacity depending on shelf length, a lifetime warranty, and that it is excellent for high-humidity or corrosive applications.

Compare Quantum dunnage with other brands on our dunnage racks page.
Where Quantum Wire Shelving Works Best
How MH-USA helps on a Quantum order:
- We take your room dimensions or a sketch and lay out bays, starters and add-ons.
- We match the finish to the room using Quantum’s stated environments.
- We list exact part numbers, including posts, shelves, casters, dividers and ledges, so nothing is missing on delivery.
- We quote freight to your dock or job site and can coordinate installation.
We have supplied shelving and storage across the West since 1997 and ship Quantum nationwide.

Quantum Compared With Other Wire Shelving Brands We Supply
Quantum is one of several wire shelving brands we quote. Its strengths are bin integration, a deep accessory list and straightforward starter/add-on kits in five finishes. Buyers who want a particular system ecosystem sometimes choose Metro wire shelving instead. For a side-by-side look at constructions, finishes and brands, go back to our wire shelving hub. We are happy to quote the same layout in two brands so you can compare.
Get a free Quantum wire shelving quote
Tell us the room size, finish and what you are storing. A project specialist will follow up with a layout, part numbers and pricing. Prefer to talk? Call (800) 326-4403.
Quantum Wire Shelving FAQ
Who makes Quantum wire shelving?
What is the difference between a Quantum starter kit and an add-on unit?
How much weight does a Quantum wire shelf hold?
Which Quantum finish should I choose for a cooler or humid room?
What sizes do Quantum wire shelving kits come in?
Can Quantum wire shelving be made mobile?
Does Quantum offer high-density wire shelving?
Are Quantum wire shelves NSF listed?
Plan Your Quantum Wire Shelving
Send your room size and storage list. We return a layout, part numbers and a freight-inclusive quote.


