Home | Borroughs Automotive Shelving | Albuquerque

Borroughs Automotive Shelving in Albuquerque, NM

Box Edge Plus® parts room shelving, 400 lb high-density parts drawers and service workstations for Albuquerque dealerships, fleet garages and repair shops — designed, delivered and installed by MH-USA.

Borroughs automotive workstations with upper cabinets and tool drawers in a vehicle service bay

400 lb

Per high-density drawer

19’3″

Tallest standard post

28

Drawer sizes

Install

Delivered and installed by MH-USA

Parts storage for Albuquerque service departments

Aisle of Borroughs Box Edge Plus shelving with integrated high-density drawer banks in an automotive parts room
Box Edge Plus shelving with integrated drawer banks — the standard MH-USA parts room build.

Albuquerque’s franchise dealerships cluster in two places: the Lomas Boulevard NE auto row just north of I-40, and the Coors Boulevard NW corridor on the west side, with more stores and independent lots spreading into Rio Rancho as the west mesa has grown. Away from retail, the metro’s transportation, utility, film-production and government fleets run their own shops along the I-25 and I-40 industrial corridors.

Many of the Lomas-corridor buildings are older and tight, so the practical gain is vertical and drawer-based: narrower, taller Box Edge Plus units and high-density drawers where deep open shelves currently bury parts. New Mexico installs run from our Salt Lake City base as scheduled freight with our crews meeting the truck, so you are not storing pallets of shelving in a service lane while you wait for labor.

What we supply to Albuquerque

Borroughs Box Edge Plus shelving with high-density drawer banks and adjustable shelf dividersBox Edge Plus® parts room shelvingClip-type steel shelving with welded box edges and tool-free brackets. 17 post heights to 19’3", widths 24–48", depths 12–36", gauges P0–P3, shelf adjustment on 1-1/2" centers.
Open Borroughs high-density parts drawer with galvanized dividers, bagged parts and barcode bin labelsHigh-density parts drawers28 drawer sizes with fronts from 3" to 12", up to 400 lb per drawer, full extension, factory-installed galvanized dividers and barcode-ready bin labeling.
Borroughs automotive workstation with upper cabinets, work surface and five tool drawersService bay workstationsDrawer, lift-control, reel and shelf cabinets, cart/trash and oil-receiver garages, 16-gauge work surfaces and soft-close upper cabinets at 38-5/8" or 41-5/8" working height.
  • Rivet-Span® boltless shelving for bulk boxes, oversized panels and archival records
  • B-Span® wide-span shelving for long and bulky loads
  • Flexi-Bins® plastic bin drawers with backstops for loose small parts
  • Tech benches in 48", 60" and 72" widths, adjustable 28"–36" on 1" centers
  • Seven standard powder-coat colors plus custom color matching to your OEM palette
  • Limited lifetime manufacturer warranty against defects in material and workmanship

Layout first, quote second

Configura 3D layout of a dealership service department with Borroughs workstations and parts shelving
A Configura layout of a service department before anything is manufactured.

Every project starts with a survey and a drawing, not a price list. Borroughs designs in Configura®, which imports and exports AutoCAD files, prices in real time and produces photo-realistic 3D renderings of the finished room in your colors — so the parts manager, the fixed-ops director and the GM are all approving the same picture.

Older service buildings hide columns, low soffits and utility runs inside the parts room. We survey and draw the room in Configura first, so those obstacles land on the plan instead of on install day.

1

Site survey

Room dimensions, columns, doors, lighting, sprinklers and the aisle widths your equipment needs.

2

Inventory profile

Part counts, box sizes and movement velocity set the split between shelves, drawers and bulk.

3

Layout and rendering

A dimensioned plan and 3D view in your colors, priced as designed.

4

Delivery and installation

Our crews install, level, anchor and label the system, phased around your service hours.

Get a Albuquerque parts room layout

Send a floor sketch or a parts inventory export and we will come back with a layout, a rendering and a quote.

Request a Quote See all design tools Call (800) 326-4403

Service area and support

Removable lock core being inserted into a Borroughs cabinet with a key
Removable lock cores let a shop re-key drawers without new hardware.

We serve Albuquerque, Rio Rancho, Santa Fe, Los Lunas, Belen, Bernalillo, Farmington, Las Cruces and Gallup. New Mexico deliveries are scheduled with installation rather than dropped on your dock.

Security and access control come standard on the drawer side: removable lock cores can be re-keyed without replacing hardware, and cabinets can be keyed alike for a shared bay or individually for a controlled parts cage.

Call (800) 326-4403 or request a quote and we will start with the room you actually have.

Borroughs Automotive Shelving Applications in Albuquerque

Albuquerque shops use Box Edge Plus shelving and parts drawers differently depending on whether they're a franchise dealership, an independent repair shop or a fleet garage. These are the most common use cases we see across the metro.

Franchise dealership parts rooms →Lomas Boulevard and Coors Boulevard dealership service departments typically need Box Edge Plus shelving paired with high-density drawers to fit OEM part counts into existing bays. Vertical, drawer-based layouts help when the building footprint is fixed.
Independent repair shop stockroomsIndependent shops along the west mesa and Rio Rancho growth corridor can mix open shelving with smaller drawer banks to match a leaner parts inventory than a franchise store.
Fleet maintenance garages →Transportation, utility and government fleet shops along I-25 and I-40 often standardize on high-density drawers for filters, belts and PM kit parts to keep fast-moving items organized by vehicle type.
Older, tight service buildingsMany Lomas-corridor buildings are older and space-constrained, so narrower, taller Box Edge Plus units and drawers make better use of limited floor area than deep open shelving.
Service bay workstation setupShops upgrading tech workspaces alongside parts storage can add drawer, lift-control and reel cabinets with work surfaces sized to the bay, planned in the same layout as the shelving.
Bulk and archival storage →Back-room bulk boxes, oversized panels and paperwork can move to boltless wide-span shelving, freeing the main parts room for drawer-based fast-pick storage.
Loose small-parts organization →Hardware, fasteners and small components that don't justify a steel drawer can be organized with plastic bin drawers and backstops inside the same shelving runs.
Government and municipal fleet shops →Agency and municipal repair shops along the metro's industrial corridors can apply the same high-density drawer and shelving approach used in dealership parts rooms to organize supply and part inventories.

Recent Regional Projects Near Albuquerque

We don't yet have a completed Albuquerque case study to share, so here are the nearest recent dealership parts department projects, starting with one in Las Cruces.

Dealership Flexi-Bin Parts Shelving Run →Las Cruces, NMA southern New Mexico dealership added a run of open-shelf Borroughs Flexi-Bin units, shipped direct by freight.
Dealership Flexi-Bin Parts Department →South Ogden, UTA new dealership parts department was outfitted with Borroughs Flexi-Bin, box-edge and Rivet-Span shelving.
Dealership Flexi-Bin Drawer Expansion →St. George, UTA dealership parts department expanded its storage with added Borroughs Flexi-Bin drawers, shelves and drawer dividers across two orders.

Albuquerque Borroughs shelving FAQ

Do you supply Borroughs automotive shelving in Albuquerque, NM?
Yes. MH-USA supplies, designs and installs Borroughs parts room shelving, high-density drawers and service workstations throughout Albuquerque and the Rio Grande corridor, including Albuquerque, Rio Rancho, Santa Fe, Los Lunas, Belen, Bernalillo, Farmington, Las Cruces and Gallup.
Can you lay out my Albuquerque parts room before I buy?
Yes. We survey the room, profile the inventory and produce a dimensioned layout and photo-realistic 3D rendering in Configura®, with pricing that updates as options change — all before anything is manufactured.
Does shelving need to be anchored?
Borroughs recommends anchoring any unit whose height-to-depth ratio exceeds 4 — a 7’3" high × 18" deep unit is already at 4.87. Local building and seismic requirements may call for more, so anchorage is detailed on the layout and confirmed with your AHJ.
How much weight does a Borroughs high-density drawer hold?
Up to 400 lb evenly distributed per drawer, on a roller-bearing suspension that lets the drawer fully extend. Workstation tool drawers carry the same 400 lb rating with 110% extension slides.
What shelf sizes are available?
Box Edge Plus posts come in 17 standard heights from 3’3" to 19’3", four nominal widths (24", 36", 42", 48") and seven depths from 12" to 36". Shelves adjust on 1-1/2" centers and gauges run from 24 to 18 gauge.
Do you install, or just deliver?
We install. MH-USA supplies, lays out, delivers and installs the system, including leveling, anchoring and labeling, so the room is usable when we leave.

More: Borroughs automotive shelving (full specifications) · Borroughs shelving · parts room shelving · industrial shelving · pallet rack.

Borroughs shelving for your Albuquerque shop

Free layout, 3D rendering and quote — delivered and installed by MH-USA.

Headquartered in Salt Lake City, UT • Serving customers nationwide
Local service areas: Salt Lake City • Provo • Ogden • Park City • St. George • Logan • Lehi • Orem