Penco Erectomatic® Multi-Level Shelving

Hi-Performance® clip shelving built around flush beaded posts and heavy-duty H-posts, designed for dense rows and, with engineering review, multi-level storage.

Penco Erectomatic two-level steel shelving with yellow guardrails on the upper walkway

What Is Penco Erectomatic Shelving?

Erectomatic is Penco Products’ heavy-duty clip shelving line for warehouses, parts rooms and records storage. Penco calls it the Erectomatic Hi-Performance® Shelving System. It uses the same welded box-beam Hi-Performance shelf as Penco Clipper® shelving, but with its own post system (flush beaded, angle, T and heavy-duty H-posts) and its own specified compression clip.

The practical idea is growth. Penco describes starting with a single-tier system and later expanding into high-density, multi-level or high-rise storage. Any such expansion needs an engineering review of the existing posts, bracing, anchors and slab first; it is not an automatic add-on. Day to day, shelves attach with four one-piece compression clips, so each shelf can be installed or repositioned independently on 1-1/2″ centers.

Single-tier Penco Erectomatic shelving with bin boxes and red beaded posts

Erectomatic sits in the broader family of industrial steel shelving. It is not boltless rivet shelving and not pallet rack. Think of it as four-post clip shelving with heavier, more specialized uprights. If you are comparing Penco lines, our Penco shelving overview shows how Erectomatic relates to Clipper, RivetRite and Wide Span.

Photos and diagrams on this page are Penco Products manufacturer images, shown as product examples rather than MH-USA installations.

The Erectomatic Post System

The posts are what make Erectomatic different from ordinary clip shelving. Penco offers four post types, and a typical unit mixes them: beaded posts at the front, offset angle or T-posts at the rear, and H-posts wherever the job calls for extra capacity or height. All posts in the current Penco specification are 14 gauge steel with slots punched on 1-1/2″ vertical centers for shelf adjustment.

Post Where it goes Why it matters
Beaded post Front of the unit only Flush profile allows straight-in, straight-out shelf installation and shelf changes. No dead space behind the post, so the full shelf width is usable. Spec size 11/16″ wide x 2-9/16″ deep.
Offset angle post Rear of starter units Punched on 1-1/2″ centers for independent shelf adjustment; flanges punched on 3″ centers for side and back sway braces.
Welded T-post Rear, shared between units Two angle posts spot welded together on 6″ centers. Used as a common post between adjoining units for faster assembly and fewer parts.
Heavy-duty H-post Front or rear Penco states more than two times the load-carrying capacity of beaded posts, with the same flush advantages. Used for extra heavy-duty, high-density and high-rise systems up to 4 stories.
Penco Erectomatic heavy-duty H-post upright with punched slots for shelf clips

The heavy-duty H-post is the component that lets Erectomatic go vertical. Penco’s specification lists it as 14 gauge pickled and oiled steel, 1-1/2″ overall width by 2-1/4″ deep plus an 11/16″ rear flange, with holes on 3″ centers for sway braces or side panels. It has its own splice, foot plate, side panels and connector strips for back panels.

Because H-posts can be used front or rear, a high-rise system can keep standard Erectomatic shelves and clips throughout rather than switching to a different product line for the upper levels. That consistency simplifies spare parts and later reconfiguration.

Hi-Performance® Box-Beam Shelves

Each shelf is formed with a 1-1/4″ face on all four sides. The front and rear flanges are rolled into a 3/4″ tubular box shape and spot welded to the shelf underside on 3″ centers. Corners are lapped and welded, and the sides carry a 5/8″ return flange. Penco states this design delivers shelf capacities from 400 lbs. to 2,000 lbs.

Shelves are made up to 48″ wide and 36″ deep, punched for dividers on 1-1/2″ centers, and accept label holders, bin fronts and base strips. Medium and heavy-duty shelves have ribs in the tabs so the clips stay snug.

Penco Erectomatic component diagram: shelf, shelf clip, T-post, offset angle post, beaded post, foot plate, back panel

Shelf clips and capacity classes

The shelf clip is a one-piece, zinc-plated, non-intrusive compression clip. Penco’s 2024 specification lists it at 13 gauge, bearing on the edges of two post notches with at least 1-1/2″ of bearing. Four independently adjustable clips come with each shelf, and they sit outside the storage area, so nothing protrudes into the space you are trying to fill.

Shelves are furnished in medium, heavy and extra heavy-duty classes to meet the specified capacity. Penco markets the box-beam design as needing no reinforcing channels even at extra heavy duty. Where a specified load exceeds the rated capacity of the extra heavy-duty shelf, the specification adds a reinforcing set: 13 gauge side supports and a 14 gauge center support. The exact class for each level depends on your actual item weights, which is why we ask for them during quoting.

  • Shelf adjustment: 1-1/2″ vertical centers on all Erectomatic posts.
  • Accessories: dividers, sliding dividers, bin fronts (1″, 2″ or 3″), base fronts, shelf boxes, counter tops, label holders.
  • Doors: swinging doors with 3-point locking or 72″ sliding doors covering two 36″ units.
  • Standards: Penco’s specification states compliance with SMA and ANSI MH28.1-1982.
  • Finish: baked enamel in Penco’s standard color range.

How Multi-Level Erectomatic Systems Work

A multi-level shelving system stacks shelving units and adds an elevated walkway between rows so people can pick upper tiers on foot. The Penco photo here shows the pattern: tall Erectomatic posts carry the lower shelving, an upper aisle runs between rows, and guardrails line the open edges.

Erectomatic supplies the shelving structure: posts, splices, shelves, clips, sway braces, foot plates and shims. Walkway decking, stairs, guardrails and gates are additional engineered components, and they have to be designed with the shelving as one load path.

Penco Erectomatic multi-level shelving aisle with numbered posts and an elevated upper tier

Post splices and foot plates

Penco Erectomatic post splice channel joining an upper and lower beaded post

Penco joins upper and lower posts with a 16 gauge post splice channel bolted through slots in both posts. The assembly manual shows the oval splice hole always on top and the round holes in the lower post. H-posts have their own two-piece splice. These splices are what let a post line continue from one level to the next.

At the floor, foot plates attach to each post, with anchor holes and matching shims. Heavy-duty foot plates exist for both beaded/angle/T-posts and H-posts. Anchoring, shimming and plumbing the units are part of a correct install, not optional extras.

Engineering and approvals: what is not automatic

Buying Erectomatic parts does not by itself create an approved multi-level structure. Penco’s own assembly manual states that it is the responsibility of the installers to install all required sway braces, foot plates and shims, set units plumb and tighten hardware, and it tells users to consult the factory about brace placement in seismic conditions. A walkway level adds more questions: platform and stair design, guard heights, egress, slab capacity, fire sprinkler coverage below the deck, and local building permits.

Structural design

Live loads on the walkway, shelf loads on each tier, splice locations, bracing and anchorage must be defined for your building. Mountain West sites commonly fall under seismic design requirements, so plan for engineered calculations.

Building & fire review

Elevated storage platforms usually need a permit, and sprinklers, lighting and exits have to work at every level. The authority having jurisdiction makes the final call, not the product brochure.

Access & safety

Stairs, landings, guardrails, gates and any material-transfer point are planned with the layout. Load signage and inspection routines belong in the handover.

Penco says H-post systems can reach up to 4 stories. Treat that as the product’s capability, not a guarantee for every building. Your real height is set by clear height, sprinklers, slab and the engineered design. For walkway-based layouts in general, see our guide to multilevel shelving systems and catwalk shelving.

Where Erectomatic Shelving Fits

Erectomatic suits operations with many hand-picked SKUs, a lot of unused height and a need to add capacity in stages. These are the applications we see most often for this kind of heavy-duty clip shelving:

Records & archive centers

Box-beam shelves and flush beaded posts let cartons slide in and out cleanly. Multi-level aisles turn tall buildings into dense file storage.

Service & replacement parts

Bin boxes, dividers and label holders organize thousands of small parts. Upper tiers hold slower movers above the busiest pick faces.

E-commerce & small-item fulfillment

Hand-pick zones with many SKUs benefit from more pick faces per square foot. Plan replenishment and conveyor or lift transfer to the upper level.

MRO storerooms

Maintenance parts, tooling and spares fit standard shelf depths up to 36″. Heavier items can use extra heavy-duty shelves or H-posts.

Government & institutional storage

Penco offers a GSA purchasing program, and Erectomatic’s modular parts suit evidence, supply and archive rooms that change over time.

Retail & distribution backrooms

Start with ground-level rows and plan a possible second tier early, so post type, anchoring and engineering are considered before any future expansion.

For records-focused projects, also compare high-density mobile shelving, which saves aisle space instead of building upward. Some facilities use both: mobile shelving on the ground floor and static multi-level shelving elsewhere.

Erectomatic vs. Clipper vs. Boltless Shelving

Penco sells several shelving lines that can look alike in photos. Here is how they differ, based on Penco’s published product information:

Erectomatic® Clipper® RivetRite® (boltless)
Shelf type Hi-Performance welded box-beam shelf Hi-Performance shelf (standard 18 ga shelves also offered) Rivet beams with particle board or steel decking
Connection Erectomatic one-piece compression clip, 4 per shelf Clipper one-piece compression clip, 4 per shelf Rivet beams into slotted posts, mallet assembly
Posts Beaded front, angle/T rear, heavy-duty H-posts Box posts or offset angle posts Angle and tee posts
Adjustment 1-1/2″ centers 1″ centers 1-1/2″ increments
Distinctive option Flush beaded front posts; heavy-duty H-posts for high-rise up to 4 stories (per Penco) Box or offset angle posts; open or closed units with a wide accessory line; Penco also lists multi-level use Bulky cartons and open access from all sides

Both Penco lines are used from back rooms up to multi-level installations. The practical differences are the posts and adjustment: Penco Clipper shelving adjusts on 1″ centers with box or offset angle posts, while Erectomatic adjusts on 1-1/2″ centers with flush beaded posts and an H-post option. Parts and clips are specified per line, so do not assume they interchange. For open-access carton storage, look at boltless shelving.

What We Need to Quote Erectomatic

A useful quote starts with your inventory and building, not a shelf count. Send what you have and we will fill gaps together:

  • Floor plan: room dimensions, columns, doors, docks and the clear height under sprinklers, lights and ductwork.
  • Inventory: item or carton sizes, heaviest items per shelf, and how many SKUs or boxes you need to store.
  • Picking method: how often items move, cart sizes, number of pickers and how stock reaches an upper level.
  • Building data: slab thickness if known, seismic or permit history and any existing shelving you want to reuse.
  • Timing & site: project address, operating hours during install, and your target completion date.
1

Layout

We lay out rows, aisles, shelf sizes and post types, and identify whether a single tier, back-to-back rows or a multi-level system fits best.

2

Engineering & permits

For multi-level work we coordinate structural design, drawings and the permit package with the right professionals.

3

Supply

Penco shelving, accessories and walkway components are ordered to the approved design, with freight planned to your site.

4

Installation

Installers anchor, shim, plumb and brace per the drawings and Penco instructions, then walk the system with you before use.

Used Erectomatic often appears on the market. Used savings are typically eaten by installation: parts rarely fit well after disassembly, and installer time to straighten and fit them can cost more than new. Reusing shelving you already own can work, but new is sometimes still cheaper after fix-up time. Call our sales team with pictures and we will help you decide.

Related MH-USA Shelving Projects

We have not yet published an Erectomatic multi-level case study. The closest projects we have documented are high-density shelving installations for records and storerooms. They are different products (mobile shelving), included only because they involve the same kinds of inventory Erectomatic serves:

Federal agency records storage, Salt Lake City

Supplied high-density mobile shelving so a federal facility could fit its file and records storage into a single system.

Cutting tool and hardware storeroom, West Valley City

High-density mobile shelving with small-parts bins and shallow drawers for cutting tools and assembly hardware.

Law firm file room, Salt Lake City

Replaced aging file-room shelving in a high-rise office with a new electric high-density system.

Related Ground-Level Steel Shelving You Can Buy Online

Penco Erectomatic is quoted per project and is not sold in our online store. These are related ground-level Lyon clip shelving units (beaded and angle post styles) from our steel shelving catalog. They are not Erectomatic parts and are not designed for multi-level systems, but they suit smaller single-tier storerooms.

Request a Penco Erectomatic Quote

Tell us what you store, the room size and clear height, and whether you are planning one level or more. We will reply with layout questions and next steps for a project-specific quote.

Name

Penco Erectomatic Shelving FAQs

What is Penco Erectomatic shelving?
Erectomatic is Penco’s Hi-Performance clip shelving system for warehouses. It combines welded box-beam shelves and one-piece compression clips with beaded, angle, T and heavy-duty H-posts, so it can start as single-tier shelving and expand into high-density or multi-level storage.
How much weight can an Erectomatic shelf hold?
Penco states Hi-Performance box-beam shelf capacities from 400 lbs. to 2,000 lbs., depending on the shelf class and size. The right class for each level is selected from your actual item weights during design.
What is the difference between Erectomatic and Clipper shelving?
Both use Penco’s Hi-Performance box-beam shelf, and each line has its own specified compression clip; do not assume parts interchange. Erectomatic uses flush beaded front posts, angle or T rear posts and an optional heavy-duty H-post, with 1-1/2″ adjustment. Clipper uses box or offset angle posts with 1″ adjustment. Penco lists both for applications up to multi-level storage.
How tall can an Erectomatic system go?
Penco says heavy-duty H-post systems can be used for high-rise applications up to 4 stories. The height you can actually build depends on your clear height, slab, sprinklers, seismic requirements and engineered design.
Does a multi-level Erectomatic system need a permit?
Usually yes. Elevated walkways and storage platforms are typically reviewed by the local building and fire authorities. Engineering, permits and inspections should be part of the project plan before anything is ordered.
Can I add a level to my existing Erectomatic shelving?
Possibly. Post splices and H-posts are designed for added height, but existing posts, bracing, anchors and the slab must be evaluated first. Send photos, part details and the room plan so the design can be checked.
What sizes are Erectomatic shelves?
Penco makes Erectomatic shelves up to 48″ wide and 36″ deep. Shelves adjust on 1-1/2″ vertical centers and are punched for dividers, label holders, bin fronts and base strips.
Does MH-USA install Penco shelving?
Yes. MH-USA designs, supplies and installs storage systems, including Penco shelving, with engineering and permit coordination for multi-level projects. Call 800-326-4403 or use the quote form to start.

Plan Your Erectomatic Shelving System

Share your floor plan and inventory and we’ll help you choose the right post system and layout.

Headquartered in Salt Lake City, UT • Serving customers nationwide
Local service areas: Salt Lake City • Provo • Ogden • Park City • St. George • Logan • Lehi • Orem