Cantilever Rack in Reno, Nevada

Cantilever rack for lumber, pipe, conduit, steel and building supply across Reno, Sparks and Northern Nevada, with arm-spacing checks, galvanized outdoor rows, Reno permit support, delivery and installation.

Galvanized double-sided cantilever rack holding lumber bundles and steel pipe in a Reno, Nevada supply yard with the Sierra Nevada beyond

Since 1997

Designing and installing storage

20 to 40 ft

Stock lengths we lay out for

2024 codes

Reno plan review

Free

Layout and arm-spacing check

Cantilever rack for Reno, Sparks and Northern Nevada

Northern Nevada is growing fast, and the lumber yards, building supply houses, plumbing and electrical wholesalers and fabrication shops that supply that growth all handle stock that is too long for pallet rack. Reno and Sparks serve the construction trade, the North Valleys and the Tahoe Reno Industrial Center keep adding buildings, and every one of those projects pulls in lumber, pipe, conduit, rebar and steel shapes that need to be stored straight, sorted and easy to reach.

Cantilever rack is built for that. Columns stand in a row with arms reaching out from one or both sides, and there are no front uprights in the way, so a forklift or side loader can set a 20 foot load anywhere along the row. The stock lies along the row across several arms, which keeps it straight, sorted and easy to count.

Material Handling USA has designed, supplied and installed storage systems since 1997. We are based in Salt Lake City and deliver across the Intermountain West. This page covers how to size cantilever for lumber and pipe, which rack type fits which yard, what Reno requires, and how delivery and installation work. For cantilever basics in more depth, see our main cantilever rack systems guide. If you also need pallet storage, see pallet racking in Reno. For the same approach in another high-desert market, see our Idaho Falls cantilever rack page.

Sizing cantilever rack for lumber, pipe and building supply

Building supply stock comes in a wide mix of lengths and weights. These are the common cases we plan around. Lengths vary by mill and supplier, so confirm yours.

Stock Common lengths What matters on the rack How we usually set it up
Dimensional lumber 8 to 20 ft Heavy bundles, moisture, forklift loading from the side Double-sided rows with arms sized to the bundle width, heaviest dimensions on the lower levels
Plywood, drywall and sheet goods 4 by 8 ft sheets Flat stock sags and chips edges Closely spaced arms or decking so sheets lie flat, see sheet goods racks
PVC and plastic pipe 10 and 20 ft Flexible, sags between arms, round so it rolls Closer column spacing, arms with end stops, larger diameters on lower levels
Steel pipe, conduit and rebar 10 to 40 ft Heavy, rigid, rolls Structural or heavy-duty arms rated for the bundle weight, end stops, heaviest stock low
Trim, moulding and fence rail 8 to 16 ft Light, mixed sizes, easily damaged Single-sided wall rows, one product per level, labeled at the arm tips
Single-sided cantilever rack with end-stop arms holding PVC and copper pipe in a Reno plumbing supply warehouse

Two rules that keep long stock straight

Overhang: the stock hanging past the end arms should be no more than about half the distance between arms. A long stick on a short bay with long overhangs will droop at both ends.

Flexible stock needs more support: PVC and thin-wall tube sag where steel would not, so we tighten the column spacing for those levels or add decking across the arms.

Our cantilever pipe and tubing storage guide covers arm spacing and end stops, our lumber storage cantilever guide covers bundles and loading, and vertical bar and pipe racks suit short drops and remnants.

Plan for growth. Reno’s building boom means inventory changes quickly. Leave open arm levels or room for another bay so the yard can absorb a bigger project without stock going back on the ground. Because cantilever columns and arms bolt together, a row can grow by adding columns and brace sets later, as long as the new parts match the original line. Our cantilever rack components guide explains what has to match.

Cantilever rack types we supply in Northern Nevada

The right system depends on the weight per level, the length of the stock, whether it lives inside or out, and how it is loaded. This table matches common Northern Nevada uses to the rack that usually fits.

Rack type Best for Typical Reno-area users
Single-sided cantilever Rows against a wall or fence line Plumbing counters, electrical supply, shop stock
Double-sided cantilever Freestanding rows loaded from both aisles Lumber yards and building supply branches
Roll-formed medium-duty Lighter loads indoors PVC, conduit, trim, light tube
Structural heavy-duty Heavy bundles and forklift contact Steel service, rebar, fabrication shops
Hot-dip galvanized Outdoor rows in sun, wind and winter weather Lumber, pipe and landscape supply yards
Cantilever with a roof canopy Covered outdoor storage Lumber and sheet goods that should stay dry
Portable cantilever carts Moving stock to the work area Fabrication shops and contractors

Structural vs. roll-formed

Roll-formed cantilever is lighter and costs less, and it works well for PVC, conduit and trim indoors. Structural cantilever is built from hot-rolled steel shapes and holds up better to heavy bundles of steel and lumber and to the bumps that come with forklift loading in a busy yard.

Many Northern Nevada suppliers use both: structural rows in the yard for lumber and steel, and a lighter indoor row for plastic pipe and trim. See our metal and steel storage cantilever guide for heavy loads.

Structural cantilever rack holding steel square tube, round bar and angle in a fabrication shop

Cantilever rack applications in Reno and Sparks

These are the Northern Nevada applications we plan cantilever for most often, with links to our detailed guides.

Lumber yards and building materialsDimensional lumber, trusses and panels. See lumber storage cantilever and sheet goods on cantilever.
Plumbing, HVAC and electrical wholesalePipe, conduit, duct and flat stock. See pipe and tubing storage and sheet metal storage racks.
Steel service and fabricationTube, bar, angle and channel for shops serving contractors and industrial customers. See steel storage cantilever.
Landscape, fence and irrigation supplyPosts, rail, pipe and irrigation line in outdoor rows. See cantilever rack with a roof for covered yards.
Construction contractors and equipment yardsRebar, forms, scaffold and pipe near the job. See portable cantilever carts for moving stock.
Furniture, appliance and retailSofas, mattresses, rugs and long boxed goods. See furniture storage cantilever.
Cantilever rack with closely spaced arms holding plywood, drywall and trim in a building supply warehouse

Building supply and sheet goods

Building supply branches mix long lumber with sheet goods and trim. Lumber goes on double-sided rows with arms sized to the bundle, while plywood and drywall need closely spaced arms or decking so sheets lie flat and edges stay clean.

Short pieces and drops fit better in vertical bar and pipe racks or on portable carts, and boxed fittings and fasteners belong on pallet rack or shelving next to the cantilever rows.

Regional cantilever projects near Reno

We haven’t installed a cantilever project in Reno yet. Below are our nearest real cantilever projects in the Intermountain West, labeled as regional. We describe the business and the work, but we don’t publish layouts, quantities or prices.

Building materials yard, Boise, IdahoA single-sided cantilever run along an outdoor yard perimeter for long building products. Read the Boise yard case study. (Regional project, cantilever.)
Roofed lumber and sheet goods rack, UtahCantilever with a roof canopy for covered outdoor lumber and panel storage. See cantilever rack with a roof. (Regional project, cantilever.)
Fence and pipe distribution branch, Murray, UtahStructural cantilever with pipe stops for round stock at a pipe and fence distributor. Read the pipe distributor case study. (Regional project, cantilever.)
Woodworking company, Twin Falls, Idaho (2020)Cantilever rack for lumber and long materials at a Magic Valley woodworking shop that has bought rack from us since 2015. (Regional project, cantilever.)

The pattern is the same for Northern Nevada suppliers: start with the rows you need now, then add columns and arms as the yard grows. Designing on one cantilever line from the start keeps later parts compatible. For a Reno-area pallet rack project, see our pallet racking in Reno page.

Outdoor yards: sun, wind, winter and earthquakes

Many lumber and pipe cantilever rows in Northern Nevada live outside, and the high-desert climate shapes the design.

Finish. Painted rack works indoors. Outdoors, strong sun, winter freeze-thaw and de-icing salt tracked in by trucks make hot-dip galvanized columns and arms the better long-term choice.

Wind and snow. Reno sits at the foot of the Sierra Nevada, so winter storms and gusty winds are part of the design. Snow on open arms is part of the load the rack carries, and a roof canopy adds snow and wind loads on the columns. Loads depend on the site elevation, so the engineer sets them for your address rather than from a rule of thumb.

Footings. Where outdoor rack sits on piers or footings rather than an existing slab, the engineer sizes them for frost and soil conditions so the row doesn’t heave. Asphalt and gravel are not reliable anchor bases on their own.

Seismic design for cantilever

Northern Nevada is earthquake country, and Reno plan review asks for the seismic design category up front. Cantilever rack has to resist sideways force along the row and front to back, which drives base size, anchor count and bracing.

Keep the heaviest bundles on the lower arms, load evenly on both sides of a double-sided row, and never load one side full while the other is empty. Our rack seismic compliance guide explains what engineers check.

Double-sided cantilever rack with a roof canopy holding lumber and plywood bundles in a Northern Nevada yard

Reno permits and code for cantilever rack

Reno, Sparks, unincorporated Washoe County and Storey County each run their own permit offices, so confirm requirements for your address before you order. The rules below are summarized from published City of Reno guides.

Current code. The City of Reno adopted the 2024 building codes with the 2024 Northern Nevada Amendments on July 1, 2025, and since January 1, 2026 accepts plans only under the 2024 editions. The Reno Fire Department enforces the 2024 International Fire Code.

Cantilever rack What Reno asks for
5 ft 9 in tall or less No permit
Over 5 ft 9 in up to 8 ft Structural plans and a special inspections application. Rack must be anchored to the current ASCE 7 standard, and the Building Official may ask for structural calculations
Over 8 ft Structural plans, structural calculations and a special inspections application
With a roof canopy The canopy is a structure, so plan for engineered drawings for snow and wind loads and a building permit
Storage 12 ft or more, or high-hazard goods over 6 ft High-piled storage rules, plus a Reno Fire Department operational permit

Reno’s Storage Rack Guidelines require calculations stamped by a Nevada-licensed professional engineer, and applications go through the OneNV online portal. Most cantilever in a lumber or pipe yard is taller than 8 feet, so plan on engineered drawings and anchors that the special inspector checks. Plastic pipe stored high indoors can trigger the high-piled storage rules, and our warehouse fire safety guide covers the sprinkler side.

Sparks, Washoe County and Storey County. Sparks and Washoe County have moved to the 2024 codes, with fire review in much of the county by the Truckee Meadows Fire Protection District. Storey County, home of the Tahoe Reno Industrial Center, is also on the 2024 codes, and final rack approval there starts with a Storey County Fire Prevention inspection.

Delivery and installation across Northern Nevada

We deliver and install cantilever rack throughout Northern Nevada. Freight is quoted by destination, and the rack ships from the manufacturer or distribution warehouse that best fits your order. Reno area: Sparks, Verdi, Cold Springs and the North Valleys. East of Reno: Fernley, Fallon, the Tahoe Reno Industrial Center and Dayton. Beyond: Carson City, Minden, Gardnerville and Winnemucca.

1

Layout and arm check

Send stock lengths, bundle weights and a site photo or plan. We lay out rows, column spacing and arm lengths for free.

2

Engineering and permits

We provide the rack details a Nevada-licensed engineer needs for stamped drawings and calculations.

3

Delivery

Columns, arms and braces ship to your yard or dock on a confirmed date. Long freight needs room to unload.

4

Install and sign-off

Columns are stood, braced and anchored, arms set at the planned levels, inspections completed and capacities posted.

After installation, keep forklift drivers from pushing loads against the columns, protect row ends near busy drives with guards, and inspect arms and connections regularly, especially after an earthquake. See our rack inspection and repair page.

New vs. used cantilever rack in Reno

Used cantilever comes up often. Before you count on the savings, it helps to know where the money goes.

Used savings are usually used up by installation. Rack that has been taken down and moved rarely goes back together cleanly. Arms from different lines don’t fit the columns, bolt holes don’t line up, and bent arms or bases need replacing. The installer time spent straightening and fitting used parts often costs more than the difference in price, so new rack frequently ends up cheaper once it’s installed. Stamped drawings for rack over 8 feet also depend on known capacities, which are hard to document for unmarked used parts.

Reusing rack you already own can work, especially for a straight move of a known system. Even then, new parts are sometimes cheaper after the fix-up time is counted.

The quickest way to decide is a call to our sales team with pictures of the columns, arms and any labels. We’ll tell you honestly whether it’s worth installing. Our used vs. new cantilever rack guide covers the trade-offs in more detail.

Plan your Reno cantilever row online

Set columns, arms and levels in our free cantilever rack configurator, then send the design for a Reno or Sparks freight and installation quote.

Open the Configurator See All Design Tools Call (800) 326-4403

Get a free quote

Tell us what you are storing, the stock lengths and weights, and your timeline. A project specialist will follow up with layout options and pricing. Prefer to talk? Call (800) 326-4403.

Name

Reno cantilever rack FAQs

Do I need a permit for cantilever rack in Reno?
Rack 5 feet 9 inches tall or less needs no permit. Taller rack needs a building permit, and over 8 feet Reno asks for structural plans, stamped calculations and a special inspections application. A roof canopy is a structure and needs engineering.
What is the best cantilever rack for lumber?
Double-sided structural or heavy-duty roll-formed rows with arms sized to the bundle width work well. Put the heaviest dimensions on the lower levels, and add a roof canopy if the lumber must stay dry.
How far apart should cantilever arms be for PVC pipe?
Close enough that the pipe hanging past the end arms is no more than about half the arm spacing, and closer than you would use for steel, because PVC sags. Many suppliers add decking or tighter column spacing on the PVC levels.
Should outdoor cantilever rack in Northern Nevada be galvanized?
For rows that live outside, hot-dip galvanized columns and arms hold up much better to sun, freeze-thaw and de-icing salt than painted rack. Painted rack is fine indoors.
Why does seismic design matter for cantilever rack in Reno?
Northern Nevada is earthquake country, so cantilever is designed for sideways force as well as weight. That affects base size, anchors and bracing, and it is why heavy bundles belong on the lower arms.
Do you deliver and install cantilever rack in Reno and Sparks?
Yes. We deliver and install across Northern Nevada, including Reno, Sparks, Fernley, Carson City and the Tahoe Reno Industrial Center. Freight is quoted by destination.
Is used cantilever rack cheaper in Reno?
Usually not once it’s installed. Used savings are typically used up by installation, because disassembled rack rarely fits well and installer time spent straightening and fitting parts costs more than new. Reusing rack you own can work. Call us with pictures and we’ll help you decide.
What should I send for a cantilever rack quote?
Stock types and lengths, the heaviest bundle weight per level, whether the rack is indoors or outside, the available row length and height, and how you load it. A site photo helps.

Cantilever rack in other locations: Idaho Falls, Idaho · Boise, Idaho · Salt Lake City · Denver · Phoenix · Las Vegas · All cantilever rack · Pallet racking in Reno

Planning cantilever rack in Reno or Sparks?

Free layout and arm-spacing check, seismic-ready rack details and delivery and installation across Northern Nevada.

Headquartered in Salt Lake City, UT • Serving customers nationwide
Local service areas: Salt Lake City • Provo • Ogden • Park City • St. George • Logan • Lehi • Orem