Modular Buildings in Houston, TX

Control rooms, E-houses, guard booths and in-plant offices for Houston petrochemical, energy, port, medical and distribution sites.

Call (800) 326-4403 or email Sales@MH-USA.com

Tan steel guard shack with windows on every side and a rooftop HVAC unit set on a concrete pad

4 to 8 Weeks

Typical Lead Time, Subject to Confirmation

Quoted

Per Configuration

Relocatable

Bolted Panel Construction

Gulf Coast

Delivery & Installation

Modular buildings for Houston and the Gulf Coast

Material Handling USA supplies factory-built modular buildings across greater Houston, from the Ship Channel and Pasadena to Katy and The Woodlands. As an authorized dealer for a leading U.S. modular building manufacturer, we quote, coordinate freight and arrange installation.

Energy and petrochemical sites here often need buildings designed around hazardous areas, blast exposure and hurricane winds.

Factory-built electrical building with a row of switchgear cabinets behind open service doors

The petrochemical complex along the Houston Ship Channel, the Port of Houston, the Texas Medical Center, NASA’s Johnson Space Center and large distribution parks drive demand. See our in-plant and industrial modular buildings and modular in-plant offices.

Houston industries we supply

Energy and petrochemical work leads, with port, medical and distribution sites close behind.

🛢

Oil, gas and petrochemical

Control rooms, E-houses and offices. See oil, gas and energy buildings and control buildings.

⚓

Port operations

Gate houses and guard booths. See guard booths.

🏥

Healthcare

Support rooms and clean rooms. See healthcare buildings.

🚀

Aerospace

Test rooms, clean rooms and offices. See aviation buildings.

🚚

Distribution

In-plant offices and shipping offices. See distribution buildings.

⚠

Hazardous areas

Offices near classified areas. See combustible-dust areas.

Modular building types for Houston facilities

Every building is factory-built from insulated wall panels and quoted per configuration. Good fits for Houston sites include control rooms, E-houses and guard booths, then in-plant offices for distribution. See the full range on our in-plant and industrial modular buildings page, and booth-only options on our guard booths page.

Single-story modular in-plant office with a door and a row of windows on a warehouse floorIn-plant officesSingle rooms to multi-room suites on the plant floor.
Two-story modular in-plant office with a yellow steel stair and windows on both levelsTwo-story officesMore rooms on the same footprint, with a steel stair.
Prefabricated guard booth with large windows and a rooftop HVAC unit beside a barrier gateGuard boothsGate, truck-entrance and parking booths with HVAC.
White modular panel room with a vision-panel door on a sealed floor, used for clean inspection workCleanrooms and clean roomsHardwall rooms for clean assembly, inspection and labs.
Green factory-built electrical house with a personnel door, ready to shipEquipment enclosures and E-housesRooms for machines, compressors and switchgear.
Tan prefabricated exterior building with a door and windows beside a gate arm at an industrial siteExterior buildingsOutdoor-rated buildings engineered for site loads.

In-plant offices for Houston plants and warehouses

Finished single-story white modular office with a door and a long row of windows in a warehouse

Gulf Coast warehouses are hot and humid, so in-plant offices need HVAC sized for latent heat as well as temperature.

Start with our modular in-plant offices page, or go straight to a standard size: 8 x 8, 8 x 10, 10 x 10, 10 x 12, 12 x 12, 12 x 16 feet.

Wind, flood and hazard notes for Houston

Houston’s Gulf Coast location brings hurricane-force wind design, heavy rain, flood zones and heat and humidity for much of the year. Exterior buildings are engineered for the site’s wind loads, and pads are set with the flood designation in mind.

Near process units, siting and blast exposure follow your facility’s siting study. See prefabricated control buildings.

Prefabricated exterior building with a flat roof and windows, protected by yellow bollards
  • Wind: anchor exterior buildings for the site’s hurricane wind design.
  • Flood: check the flood designation before setting pad height.
  • Humidity: size HVAC for moisture removal, not just cooling.
  • Process areas: provide hazard classification and siting study results before drawings start.

Permits in Houston

Permits are usually required for occupied modular buildings, including many interior offices. Check with the Houston Permitting Center for sites in Houston, or the building department of Pasadena, Baytown or whichever city holds your site, and Harris County for unincorporated areas, before you order. We supply drawings for the submittal; see our permits and code compliance guide.

Delivery and installation in Houston and the Gulf Coast

1

Scope and quote

Tell us the use, size, power and HVAC needs. We return drawings and a quote with exclusions listed.

2

Approve drawings

Approved drawings start production; they also support your permit submittal.

3

Factory build

Our manufacturer partner builds the panels and frame, typically 4 to 8 weeks, subject to confirmation.

4

Deliver and install

Flatbed delivery, then assembly on site in days for most buildings.

Telehandler setting a prefabricated booth in place at a new industrial facility

We supply Houston, Pasadena, Deer Park, La Porte, Baytown, Channelview, Katy, Sugar Land, Pearland, The Woodlands, Conroe and Texas City.

For the full timeline see modular building lead times and how modular buildings are installed, or send your details through the modular building quote form.

Related projects we have supplied

We have not published a Houston case study yet. These projects show the heavy-industry and in-plant work Gulf Coast sites order.

Two-story modular in-plant enclosure with a steel stair, landing and double doors inside a plantTrystar, Faribault, MinnesotaIn-plant office scope for a power-equipment maker; Trystar also lists a Houston location.
Long white factory-built modular enclosure with personnel doors standing on a plant floorHydro ExtrusionsIn-plant offices in a high-heat metal plant.
Gray and white prefabricated exterior building with a pitched roof on a gravel padGSL Electric, northern Nevada mine siteA booth-style building with electrical and HVAC packages delivered to a remote industrial site.

Nearby service areas: Dallas, TX · San Antonio, TX · Austin, TX · Atlanta, GA · Salt Lake City, UT · Ogden, UT · Boise, ID · Idaho Falls, ID · Denver, CO · Colorado Springs, CO · Las Vegas, NV · Reno, NV.

Planning resources: Modular vs. conventional construction · Cost guide · Ballistic buildings · Modular restrooms · E-houses and control rooms · Fire suppression · HVAC options · Financing and tax benefits · Ballistic ratings guide · Buyer’s guide

Protect the Building: Bollards and Railing

Modular buildings are quoted per project. Steel bollards and pipe safety railing that protect walls and doors from forklift and vehicle traffic can be ordered online.

Browse all protective barriers →

Houston modular building FAQs

Do you deliver modular buildings in Houston and along the Ship Channel?
Yes. We supply greater Houston and the Gulf Coast. Freight and installation are quoted for your site.
Can a modular building be used near hazardous process areas?
Yes, with the right specification. Hazard classification and your facility siting study decide placement, pressurization and electrical design, so we confirm them before drawings.
Do I need a permit for a modular building in Houston?
Usually, yes. Check with the Houston Permitting Center or your city’s building department, or Harris County for unincorporated sites. We supply drawings for the submittal.
How long does a modular building take for a Houston site?
Typically 4 to 8 weeks from approved drawings, subject to confirmation, plus freight and a few days on site for most buildings.
How much does a modular building cost in Houston?
Every building is quoted per configuration. Pricing depends on size, wall height, options such as HVAC and glazing, freight and site conditions. Request a quote with your size and use and we will return drawings and a price with exclusions listed.

Planning a modular building in Houston?

Tell us the use, size, hazard classification and site. We will return drawings and a quote for delivery and installation.

Headquartered in Salt Lake City, UT • Serving customers nationwide
Local service areas: Salt Lake City • Provo • Ogden • Park City • St. George • Logan • Lehi • Orem